MEDIWISH · Indicator tape
ETO Indicator Tape — 19 mm × 50 m
Self-adhesive Type 1 indicator tape for identifying packs exposed to an ethylene oxide process. The 19 mm × 50 m roll uses an orange-to-green indicator response and is individually bagged.
- Roll width
- 19 mm
- Roll length
- 50 m
- Response
- Orange → green
- Order reference
- 8763-233
Product configuration
| Product | ETO indicator tape |
|---|---|
| Ordering reference | 8763-233 |
| Indicator category | Type 1 process indicator |
| Specified process | Ethylene oxide (EO / ETO) |
| Roll format | 19 mm × 50 m |
| Indicator response | Orange before processing; green response |
| Individual packing | One roll per polybag |
A distinct EO tape configuration
Specify article 8763-233 and the 19 mm width when ordering. Each roll contains 50 m of tape and is individually bagged, so the order can be planned by roll count and required total tape length.
Mark, process and read
Apply to the pack
Cut a length of tape and apply it to the outside of the EO-process pack, keeping the indicator marks visible.
Inspect the response
After processing, inspect the orange-to-green response on the tape and record the observation with the pack or load identification.
Review the complete record
Keep the tape result with the EO cycle record and other monitoring required for that load; colour is a process-exposure indication.
A chemical response alone does not establish whole-load sterility or replace required biological monitoring, specified tests or release review. Do not release a load on the basis of this indicator alone.
Request a quote for this tape
Request 19 mm × 50 m ETO indicator tape under reference 8763-233. State the number of individually bagged rolls and the delivery country and postcode. Use the roll reference, quantity and destination together so the quotation identifies this exact tape configuration.



















