MEDIWISH · Cleaning monitoring guide
Make the test position repeatable
Place a cleaning indicator at a location defined by the facility’s approved placement assessment and the instructions for the exact indicator and holder. There is no universal shelf, corner or basket position that applies to every washer-disinfector. The useful question is whether the chosen position represents the configuration you intend to monitor and can be repeated reliably.
Define the monitored configuration
Identify the washer and loading rack, the programme, cleaning chemistry and representative load. Record the basket or tray and the intended indicator location. A description such as “inside the washer” cannot explain a change in result if a later test is placed on another shelf or behind another instrument.
The MEDIWISH Load Check placement record asks for a position identifier, attachment location, orientation and access to the test areas. It also records the reason for selecting each position and the assessment that approved routine use. The form does not prescribe a minimum number of trials or a universal monitoring schedule.
Use the correct holder and preserve access
For Load Check REF 2345678, the specified holder is REF 12-5815. Before installing the card, inspect the holder for contamination, blocked openings, deformation or unreliable retention. Fit an unused card without rubbing, wetting or creasing its test-soil areas. Seat it in the position described by the applicable instructions and check that the frame does not cover areas that must be exposed.
Secure the assembly at the assessed location. Check that it cannot detach or interfere with the spray arms, door, loading rails or instruments. Preserve the required water access; do not add instruments or another indicator in front of the monitored areas. Holder geometry forms part of the test configuration, so substituting a different holder can change the observation.
Photograph what makes the position repeatable
- Show the basket or rack identifier and enough of the load to locate the assembly.
- Show the attachment, orientation and clearance around the holder.
- Show the relevant faces and openings of the actual holder.
- Identify the photo, procedure revision and position code in the test record.
A product photograph outside the washer can identify the parts, but cannot establish a validated location in a loaded washer. A photograph of one face also cannot demonstrate access to the opposite face.
Respond consistently when a result changes
After processing, retrieve and inspect the indicator according to its instructions. Retain its location and orientation with the result. If soil remains, compare the actual installation with the approved record before drawing conclusions. Do not move the next indicator to a more exposed position simply to obtain a favourable result. Review changes to the holder, load arrangement or washer configuration through the facility’s procedure.
Check the indicator and its holder
Check the system details for MEDIWISH Load Check REF 2345678 and the matching 12-5815 cleaning-indicator holder. Request current installation instructions for the exact supplied configuration.
