Mediwish · Tyvek roll-format packaging
Prepare the pack length for the intended load
Tyvek sterilization rolls are a roll-format option for preparing medical-device packaging to length. Choose the roll width, material version and closing process together, with room for loading, closing and handling as specified in the packaging instructions.
The selected roll, the device being packed and the sterilization process must be suitable for use together. The Tyvek name alone does not define the complete package specification.
- Format
- RollPrepare a section to the required length
- Sizing
- Width + lengthMatch the packaging size to the load
- Material
- By versionIdentify the complete packaging construction
- Processing
- By instructionsMatch packaging, device and equipment
Specify the complete material construction
Use the roll reference and the specification for the selected version when choosing packaging.
Identify the material version
Confirm the Tyvek grade, any coating and the other packaging layer for the selected roll. A material name does not by itself identify a finished package or its processing limits.
Keep the format clear
Roll width and total roll length describe the supplied reel. The length of an individual pack is selected during preparation; it is separate from the total length on the reel.
Size and close the pack for the load
Choose the width before preparing a section of roll.
Match the width
Allow the space required for loading the device, making the specified closure and handling the pack.
Prepare the length
Cut the section to suit the load and the closing procedure in the packaging instructions.
Use the specified closure
Follow the material and equipment instructions for the closing method and settings. Do not select settings from the Tyvek name alone.
Match the roll to the intended process
Use the processing instructions for the selected packaging version, device and sterilizer.
Check method and cycle together
A general Tyvek material description is not confirmation that a particular roll can be used with every sterilization method or cycle. Use the method and parameters specified for the selected packaging system.
Read any supplied process indicator
Where an indicator is supplied, follow its instructions for the starting colour, endpoint and interpretation. A colour change alone does not confirm sterility of the contents.
Inspect the packaging and closure before use. Apply the specified handling and storage conditions; a processing indication does not replace an integrity check or the facility's release procedure.
Include these details in the roll specification
A complete specification distinguishes the required version from other Tyvek packaging formats.
Product and size
- Roll reference and complete material construction
- Nominal roll width and total roll length
- Device or load dimensions and the intended pack length
Use and supply
- Intended sterilization method and cycle
- Closing equipment and the specified closing procedure
- Indicator requirements, quantity and packing details
Identify and label prepared packs according to the packaging instructions and the facility's procedure. Follow the specified storage conditions, keep packs clean and dry, and protect them from excessive heat, direct sunlight and moisture.









