MEDIWISH · DENTAL SUCTION TIPS
Surgical aspirator tips — choose the opening that suits the task
A 30° angled working end, an 11 mm holder connection and three colour-coded opening options. Compare the sizes below and order the required variant in bags of 25.
- Holder connection
- 11 mm
- Working angle
- 30°
- Opening choices
- 3 sizes
- Pack quantity
- 25 tips / bag
Angled design and holder fit
The angled working end is used for dental aspiration of saliva and other fluids. The tips fit 11 mm suction holders; the 30° angle and colour-coded opening choices help identify the required configuration.
Use product reference MZS40087 and specify the opening size when ordering.
Compare the three opening options
| Opening | Illustrated colour | Overall length |
|---|---|---|
| 1/16 in | Blue | 7 3/4 in |
| 1/8 in | White | 6 1/2 in |
| 1/4 in | Green | 6 5/16 in |
The illustrated colours distinguish the three opening options. Confirm the required option with the size selector and the order specification.
Wider catalogue family: the surgical aspirator-tip entry also lists a 3/8 inch option and vented/non-vented designs. These are family-range options, separate from the three size choices shown for this product.
Material and handling
The material and permitted preparation must match the supplied version. Check the product labelling and instructions before use, particularly when a specific polymer or reprocessing method is required.
Select the tip opening for the intended dental procedure and check the connection with the holder in use. Follow the supplied instructions for use and disposal.
Bags of 25 and ordering information
Each bag contains 25 tips. State reference MZS40087, the required opening, colour and number of bags in the enquiry or purchase order.
Outer-case quantity is confirmed with the selected supply configuration. Request the material specification and handling instructions when agreeing the order.














